..
.. Operation Steps :

Step 1.
Insert the white painted shaft into the base frame and fix the base by screw and washer. Then, twist the nut tightly with a wrench.
Step 2.
Insert the galvanized shaft into the white painted shaft ( there is a lifting spring inside).

Step 3 & Step 4.
Put the height adjuster in and twist it tightly after adjusting the height.
Step 5.
Put the main body of steamer into the right position.
¡C
Step 6.
Check the jar support to see whether it can be rotated ( it can't be rotated if you install the main body in the wrong direction).

Step 7.
Connect the glass jar (please make sure there is a rubber cushion between the main body and the glass jar ).

 Step 8.
Please only fill with distilled or purified water into the glass jar through the water inlet.
 Step 9.
The water which is filled into the jar can't excess the red line.
¡C
¡C

Step 10.
Put the plug in the socket and turn on the steam switch.(the red indicator will be on). Three minutes later, the water inside the glass jar will boil and the steam will spray out from the steam nozzle.
¡C

Step 11.
Turn on the ozone switch upon the steam spray from the nozzle (the green indicator will be on) and the steam will be disinfected when it pass through the ozone lamp.
¡C
Step 12.
Adjust a proper distance between steamer and your client.
¡C 		Notice :
The glass jar should be cleaned regularly and the water inside the jar should be replaced frequently to avoid the residual which may affect the operation . The electric heated tube should also be cleaned by wet cloth once the water is replaced in order to prolong the machine life.

¡÷ back